TESA 03230060 Pneumatic GTL 212 Model Probe, ±1.5 mm Measuring Range, 3.2 mm Bolt Travel, Linear
In stock
SKU
03230060
Typical qualities of TESA inductive probe: excellent repeatability, durability and longevity.
- All TESA electronic probes are mounted on ball bearings, except for miniature axial probes.
- The ball bearing guidance system is highly insensitive to radial forces exerted on the measuring rod. An anti-rotation device ensures a perfect movement of the mechanical guiding system.
- The guides of axial probes are highly protected against penetration of liquids (oil) or solids (dust) through protective bellows of elastomeric quality.
- The inserts (measuring inserts) can be replaced or exchanged. A wide choice of geometrical shapes and sizes are available.
- The measuring force can be adjusted by changing the spring, depending on the probe model.
Universal probes for standard and continuous use applications.
- 8 mm diameter probe housing. Can be clamped over its entire length.
- Measuring bolt mounted on a ball bearing.
- Both the probe housing and ball-bearing guide are separate from one another, so that the measuring bolt moves easily even if the probe is not clamped appropriately.
- Degree of protection IP65 according to IEC 60529.
- Wide range of accessories including measuring inserts, spring sets, etc.
- LVDT probes compatible with measuring equipment from other makers available on request.
Typical qualities of TESA inductive probe: excellent repeatability, durability and longevity.
- All TESA electronic probes are mounted on ball bearings, except for miniature axial probes.
- The ball bearing guidance system is highly insensitive to radial forces exerted on the measuring rod. An anti-rotation device ensures a perfect movement of the mechanical guiding system.
- The guides of axial probes are highly protected against penetration of liquids (oil) or solids (dust) through protective bellows of elastomeric quality.
- The inserts (measuring inserts) can be replaced or exchanged. A wide choice of geometrical shapes and sizes are available.
- The measuring force can be adjusted by changing the spring, depending on the probe model.
Universal probes for standard and continuous use applications.
- 8 mm diameter probe housing. Can be clamped over its entire length.
- Measuring bolt mounted on a ball bearing.
- Both the probe housing and ball-bearing guide are separate from one another, so that the measuring bolt moves easily even if the probe is not clamped appropriately.
- Degree of protection IP65 according to IEC 60529.
- Wide range of accessories including measuring inserts, spring sets, etc.
- LVDT probes compatible with measuring equipment from other makers available on request.
range | ±1.5mm |
---|---|
repeatability | 0.015µm |
Accuracy | 0,2 + 2,4 · L 2µm with BPX/Twin T10 0,2 + 0,8 · L µm (L in mm) |
waterproof | Yes |
IP rating | IP65 |